logo
phone
  • Connect
TIPS
Remove lime and mortar splashes! faq

Avoid lime and mortar splashes on the profile, glazing and fittings. Both the profile and the glazing could be damaged and fittings jammed as a result of solidified mortar residue.

Ventilate rooms several times a day! faq

An inflow of colder air lowers the relative humidity in the room and creates a healthier room climate. Preferably ventilate the living area several times a day, as a relative humidity of over 60 % can lead to mould growth.

Do not use caustic fluids faq

For normal cleaning of the frame surface use a solution of mild dishwashing liquid. Do not use scouring agent, paint thinner or . For stubborn dirt always use special cleaning agents that can be obtained from the window supplier or from a window specialist.

Regular cleaning on the outside! faq

Clean the outside of your windows regularly. Pollen, tar or ferrous particles may be burned in by the sun’s rays. Once a layer has deposited it is not easy to remove.

Lubricate fittings! faq

Lubricate the fittings at least once a year to ensure ease of movement at all times.

Tighten handles! faq

Always tighten loose window handles. You can find the screws by lifting the cap under the handle and turning it out of the vertical into a horizontal position.

Care for the seals! faq

Rub the seals in the frame twice a year with sealing agent e.g. talcum, deer tallow or silicon oil (from specialists), to keep them soft and in good working order. Damaged seals have to be replaced.

Clean drainage openings! faq

Check the drainage openings in the frame profiles every now and again. Cleanliness is important for satisfactory drainage.

Technical
uPVC Window Configuration

uPVC Window ConfigurationCASEMENT WINDOW
1. 2.50mm thick and multi-chambered uPVc profile for structural strength and thermal insulation.
2. 1.50m to 2.00mm galvanized steel reinforcement to further increase window strength.
3. 2.50mm to 3.00mm thick Stainless Steel Friction Hinge to support window opening angle.
4. Zinc plated Espagnolette and Shootbolt for multipoint locking system ensuring locking safety.
5. Powder coated window handles to lock, open/close window matching profile colour.
6. ABS drain caps to drain water.
7. EPDM multi-gasket seals to ensure acoustic and thermal insulation and stop water infiltration.
8. Insulated Glass option with desiccant filled aluminum space bar and butylene and polysulphide glue sealing to ensure best thermal and acoustic insulation.
9. ABS Wind Bridge and Stop Block to aid window sash movement.

Glass Option
FLOAT GLASS faq image This is the most cost effective option because the features of this type of glass are rather basic. Float glass refers to a completely flat plane of clear glass. The term float is derived from the production method, and this type of glass is also often referred to as flat glass.
TEMPERRED GLASS faq image it is a type of safety glass that has increased strength and will usually shatter in small, square pieces when broken. It is used when strength, thermal resistance and safety are important considerations. At home you are likely to find toughened glass in the shower and sliding glass patio doors. For commercial structures, it is used in unframed assemblies such as frameless doors, structurally loaded applications and where there is a danger of human impact. Toughened glass is typically four to six times the strength of annealed glass.
LAMINATED GLASS faq image This is the most cost effective option because the features of this type of glass are rather basic. Float glass refers to a completely flat plane of clear glass. The term float is derived from the production method, and this type of glass is also often referred to as flat glass.
TINTED GLASS faq image Ordinary tinted glass is popular because it reduces heat gain and carbon emmissions, although it also marginally reduces visible light transmission. High Performance or Low-e tinted glass or spectrally selective tinted glass reduces solar heat gain to below that of ordinary bronze/ gray tint but has a visible transmittance closer to clear glass. The tint has little effect on the U-factor but reduces solar gain considerably, which can reduce the need for air conditioning in the summer. Tinted glass is useful in controlling glare - especially for those windows facing east or north east. Return the sunlight not glare into your home.
LOW-E GLASS faq image Low-e glass brings out the best that technology has to offer for improving your views and comfort! A cool, metal oxide coating is applied to clear or tinted glass, so that the appearance and performance are the same regardless of glass thickness. Low-e glass is recommended by many energy efficiency experts as a result of high performance combined with aesthetics. Low-E glass typically cost about 15%% more than ordinary glass, but they reduce energy use by as much as 30-50%%, by using most of the heat gain in winter but keep the harmful UV rays out during the summer, and when used in insulated glass units - can have even better benefits. For hot climates, low-E coating should be applied to the outside pane of glass. If the windows are designed to provide heat energy in the winter and keep heat inside the house typical of cold climates, the Low-E coating will maximise benefit by being on the inside pane of glass.
Warranty
PROFILE GUARANTEE
  • No unnatural colour changes or cracked surfaces due to weather influences for white window and door profiles made of UPVC, with the exception of mitre cracks.
  • No condensation between the panes of insulating glass.
  • The function of the adhesive and the sealing of insulation glass panes with the window profiles is guaranteed for all ARTERIOR WINDOWS uPVC window systems, provided that the ARTERIOR WINDOWS installation and maintenance guidelines have been adhered to.
HARDWARE GUARANTEE
  • PVD coated door handles are guaranteed against corrosion if there is no mechanical damage.
  • No unnatural colour changes or surface cracks due to weather influences in door fillings.
  • There is no guarantee for changes in the surface appearance as a result of dirt.
WINDOW FUNCTION GUARANTEE
  • ARTERIOR WINDOWS guarantees safe-guarding that ARTERIO WINDOWS products can be repeatedly serviced by our experts in such a fashion (original parts not obligatory), to retain their full function for a period of 30 years. However, this presupposes that the frame construction (frame and sash) is not damaged. The 30-year period starts from the production date. The services required to maintain the functionality, including the materials required, labour etc. will be invoiced according to the currently valid rates.
WOOD GRAIN LAMINATED PROFILE GUARANTEE
  • 20 Years LG Korea wood grain profile colour will not fade due to weather influences.

WOOD GRAIN LAMINATED PROFILE GUARANTEE
  • 10 Years LG China wood grain profile colour will not fade due to weather influences.


© Design and Developed by AND Ltd. SEO and promotion by e-tech